Henrytools an American company taking pride in its dedication to excellence and its commitment to airtool innovation.

We have been supplying industries of all kinds with all of their airtool needs since 1975. At Henry Tools selling products is not our number one goal; it is more important that we fulfill our customer's needs. We manufacture multiple pneumatic tool grinders and chipping hammers that we can customize to meet our customers individual requirements.

1. Tools that have been damaged and are in need of repair frequently need parts. This section of the site is designed to make finding the right parts to order both rapid and efficient.

2. Locate in the list below for the exact model of the tool, and click on the PDF file icon to the right of it. The print for the tool will be displayed. (Adobe Reader is required).

3. Use the print to determine the Part Number of the component to be ordered and replaced.

 

Henrytools provides complete air tool repair, maintenance, and testing on all the tools we manufacture. We certify that all completed repairs comply with all safety standards.

Contact Henrytools to order the perfect pneumatic tool for your application!

 

New Powertool News

NEW 2010 Downloadable Brochure Brochure

 

Welcome to AirtoolParts.com...

USA Flag picMade in America.

N-16 SERIES LIGHT DUTY CHIPPING HAMMERS

NA-16 Series Light Duty Chipping Hammers
NA-16 chipping hammer in action pic

Features:

  • Featuring a FRONT exhaust.
  • Hard-hitting action for fast chipping and peening.
  • (5200 blows per minute)
  • Heavy-duty spring type chisel retainer.
  • Available with either a hex, round, or taper tool nose.
  • (Spring/Beehive Chisel Retainer)
NA-16 chipping hammer picNew
NA-16 light-duty penumatic chipping hammer featuring a FRONT exhaust.
NA-16 Series Chipping Hammer (Front Exhaust)
Model Throttle Type Exhaust Direction Blows per Minute Tool Nose Bore and Stroke Overall Length Weight Body Diameter Working Air Consumption Parts Print
NA-16X Standard Lever FRONT Exhaust 5200 0.371 Hex or .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
 
NA-16R Standard Lever FRONT Exhaust 5200 0.401 Round .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3.5 Lb.
(1.6 Kg)
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
 

*Specify Round Shank or Hexagon shank when ordering.

Chipping Hammer Chisels
Part Number Cutting Edge Width Description Overall Length Shank Type
595001
1/2"
Narrow chisel
7"
Hex shank picHex Shank
595003
1/2"
Narrow chisel 12" Hex shank picHex Shank
595004
1/2"
Narrow chisel 18" Hex shank picHex Shank
596009
1/2"
Narrow chisel 7" Round Shank picRound Shank
596010
1/2"
Narrow chisel

12"

Round Shank picRound Shank
596011
1/2"
Narrow chisel 18"
Round Shank picRound Shank

 

Taper tool nose.:401 Parker Taper tool nose if requested is a special option.

Air Inlet Size: 1/4" NPT
Hose Size Recommended: 3/8" (10 mm)
Recommended air pressure 90 PSI

Chisel types: Hexagon or Round shank.

See chisel chart in Accessory section for chisel types.

Catalog View: coming soon.

Parts Manual: coming soon

 

 

 

 

N-16 Chipping Hammer Series
N-16 action pic

Features:

  • Featuring a SIDE exhaust.
  • Hard-hitting action for fast chipping and peening.
  • (5200 blows per minute)
  • Heavy-duty spring type chisel retainer.
  • Available with either a hex, round, or taper tool nose.
  • (Spring/Beehive Chisel Retainer)
N-16 chipping hammer henrytools pic
N-16 light-duty chipping hammer chipping hammer with SIDE exhaust.
N-16 Series Chipping Hammer (Side Exhaust)
Model Throttle Type Exhaust Direction Blows per Minute Tool Nose Bore and Stroke Overall Length Weight Body Diameter Working Air Consumption Parts Print
N-16X Standard Lever SIDE Exhaust 5200 0.371 Hex or .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3 lbs., 3 oz.
1.5 kg
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
 
N-16R Standard Lever SIDE Exhaust 5200 0.401 Round .63 Inch x
1.44 Inch
(16 mm x
37 mm)
8.5 Inches
(216 mm)
3 lbs., 3 oz.
1.5 kg
1.7
Inches
(43 mm)
15 cfm
(7.1 L/S)
 

*Specify Round Shank or Hexagon shank when ordering.

Chipping Hammer Chisels
Part Number Cutting Edge Width Description Overall Length Shank Type
595001
1/2"
Narrow chisel
7"
Hex shank picHex Shank
595003
1/2"
Narrow chisel 12" Hex shank picHex Shank
595004
1/2"
Narrow chisel 18" Hex shank picHex Shank
596009
1/2"
Narrow chisel 7" Round Shank picRound Shank
596010
1/2"
Narrow chisel

12"

Round Shank picRound Shank
596011
1/2"
Narrow chisel 18"
Round Shank picRound Shank

 

Taper tool nose.:401 Parker Taper tool nose if requested is a special option.

Air Inlet Size: 1/4" NPT
Hose Size Recommended: 3/8" (10 mm)
Recommended air pressure 90 PSI

Chisel types: Hexagon or Round shank.

See chisel chart in Accessory section for chisel types.

 

Catalog View: coming soon.

Parts Manual: coming soon

 

 

 

 

 

 

4-BOLT HEAVY DUTY CHIPPING HAMMERS

HT-4B20 with 2" stroke 4-Bolt Heavy Duty Chipping Hammers
Ht-4B reverse angle pic 4 bolt chipping hammer action pic
HT-4B 4 bolt chipping hammer pic
Model HT-4B20 4-bolt chipping hammer shown with 2" stroke shown above.

Features:

  • Henrytools 4-Bolt chipping hammer with 2" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the opererators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.4-Bolt design provides ease of maintenance.Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accomodate your particular chisel type when ordering)
HT-4B20 with 2" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per Minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption Parts Print
HT-4B20 2400 1.125" x 2", 28.5mm x 50.8mm 14"
356mm
13.5 lbs
6.1 kg
9.5 lbs 3/8" N.P.T. 26 CFM  

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

Recommended air pressure 90 PSI

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

Recommended air pressure 90 PSI . Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

 

Catalog View: coming soon

Parts Manual: coming soon

 

 

 

HT-4B30 with 3" stroke 4-Bolt Heavy Duty Chipping Hammers
HT-4B 4 bolt chipping hammer pic
Model HT-4B30 4-bolt chipping hammer shown with 3" stroke shown above.

Features:

  • Henrytools 4-Bolt chipping hammer with 3" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the opererators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.
  • 4-Bolt design provides ease of maintenance.
  • Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accomodate your particular chisel type when ordering)
HT-4B30 with 3" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per Minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption Parts Print
HT-4B30 1920 1.125" x 3", 28.5mm x 76.2 mm 16" 406mm 14.5 lbs
6.5 kg
10.5 lbs 3/8" 30 CFM  

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

Recommended air pressure 90 PSI

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

Recommended air pressure 90 PSI

 

Catalog View: coming soon

Parts Manual: coming soon

 

 

 

 

HT-4B40 with 4" stroke 4-Bolt Heavy Duty Chipping Hammers
Ht-4B reverse angle pic 4 bolt chipping hammer action pic
HT-4B 4 bolt chipping hammer pic
Model HT-4B40 4-bolt chipping hammer shown with 4" stroke shown above.

Features:

  • Henrytools 4-Bolt chipping hammer with 4" stroke.
  • Ergonomically designed 4-bolt chipping hammer handle helps keep the opererators hand-in-line with the chisel for maximum operator comfort.
  • A forged steel or lightweight aluminum handle is available for the ultimate in versatility.
  • Steel 4-bolt flange for increased durability and strength, plus ease of serviceability.4-Bolt design provides ease of maintenance.Choice of round tool nose for .680" round shank chisels or hex tool nose for .580" hexagon shank chisels.
  • Four bolt design eliminates handle breakage.
  • Includes chisel retainer and chisel retainer spring.
  • (You specify either hex or round tool nose to accomodate your particular chisel type when ordering)
HT-4B40 with 4" stroke 4-Bolt Heavy Duty Chipping Hammers
Model Blows per minute Bore and Stroke Overall Length Weight w/Steel Handle Weight w/Alum Handle Air Inlet Working Air Consumption Parts Print
HT-4B40 1500 1.125" x 4", 28.5mm x 101.6mm 16" 406mm 15.5 lbs
7.0 kg
11.5 lbs 3/8" 33 CFM  

PLEASE NOTE WHEN ORDERING:
* For a tool with an aluminum handle, add an "A" to end of model number.
* For a tool with a hex tool nose, add an "X" to end of model number
* For a tool with a round tool nose, add an "R" to end of model number.

Recommended air pressure 90 PSI

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
2500-12-525
(6872122)
For Oval Collar Type Chisels HT-4B Series or Sullair Chippers or CP4123 chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

Recommended air pressure 90 PSI. Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

 

Catalog View: coming soon

Parts Manual: coming soon

 

 

 

 

 

HT Series Industrial Strength Chipping Hammers

HT-20 HenryTools 2 " stroke chipping hammer compatible with Chicago Pneumatic 4123
HT20 chipping hammer henrytools 3" stroke pic
  • A classic Henrytools chipping hammer. 100% compatible with the Chicago Pneumatic CP4123 series chipping hammers.
  • Featuring a 2" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose(.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Tteasing throttle for precise control. Pistol grip handle with self closing outside trigger.

 

HT20 series 2" stroke chipping hammers pic
HT-20 HenryTool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption Parts Print
HT-20 2400 1 1/8" x 2", 28.5mm x 50.8mm 14"
356mm
13.5 lbs
6.1 kg
3/8" N.P.T. 25  
* For a tool with a hex tool nose, add an "X" to end of model number.
* For a tool with a round tool nose, add an "R" to end of model number.

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
P-107243 For Oval Collar Type Chisels Henrytools models: HT-20, HT-30, HT-40 or Chicago Pneumatic 4123 Series Chippers. chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

 

Catalog View: coming soon

Parts Manual: coming soon

 

 

 

HT-30 HenryTools 3 " stroke chipping hammer compatible with Chicago Pneumatic 4123
HT30 series 3" stroke chipping hammers pic
  • A classic Henrytools chipping hammer. 100% compatible with the Chicago Pneumatic CP4123 series chipping hammers.
  • Featuring a 3" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose(.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Tteasing throttle for precise control. Pistol grip handle with self closing outside trigger.

 

HT-30 Henrytool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption Parts Print
HT-30 1920 1 1/8" x 3", 28.5mm x 76.2 mm 16" 406mm 14.5 lbs
6.5 kg
3/8" N.P.T. 26  
* For a tool with a hex tool nose, add an "X" to end of model number.
* For a tool with a round tool nose, add an "R" to end of model number.

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
P-107243 For Oval Collar Type Chisels Henrytools models: HT-20, HT-30, HT-40 or Chicago Pneumatic 4123 Series Chippers. chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a point or narrow chisel.

 

Catalog View: coming soon

Parts Manual: coming soon

 

 

 

 

HT-40 HenryTools 4 " stroke chipping hammer compatible with Chicago Pneumatic 4123
  • A classic Henrytools chipping hammer. 100% compatible with the CP4123 series chipping hammers.
  • Featuring a 4" stroke.
  • Rugged forged Steel handle.
  • Simplate valve assembly provides fine control of throttle and trouble free operation.
  • Choice of round tool nose for .680" round shank chisels(.680" Round chisel rotates freely) or hex tool nose(.580" Hexagon chisel prevents chisel rotation).
  • Increased power and efficiency on work surfaces.
  • Tteasing throttle for precise control. Pistol grip handle with self closing outside trigger.

 

HT-40 Henrytool chipping hammer compatible with Chicago Pneumatic 4123
Model Blows per Minute Bore and Stroke Overall Length Net Weight Air Inlet Working Air Consumption Parts Print
HT-40 1500 1 1/8" x 4", 28.5mm x 101.6mm 17"
432mm
15.5 lbs
7.0 kg
3/8" N.P.T. 27  
* For a tool with a hex tool nose, add an "X" to end of model number.
* For a tool with a round tool nose, add an "R" to end of model number.

 

Part No. Description Cutting Edge Width Pic Overall Length Shank Type
839008 Narrow 1" narrow chisel pic 9" hex pic
.580 hex shank
839009 Narrow 1" narrow chisel pic 12"
839010 Narrow 1" narrow chisel pic 18"
839016 Wide 2" medium chisel pic 12"
839018 Moil Point - moil point chisel 9"
839014 Narrow 1" narrow chisel pic 9" round shank pic
.680 Round shank
839017 Wide 2" medium chisel pic 9"
839023 Moil Point - moil point chisel 9"
839045 Narrow 1" narrow chisel pic 18"
839047 Wide 2" medium chisel pic 12"
839083 Narrow 1" narrow chisel pic 12"
CHISELS FOR HT SERIES CHIPPING HAMMERS .580 HEX & .680 ROUND SHANK TYPE OVAL COLLAR
Chipping Hammer Retainers
Part Number Size Fits Tool Models View
P-107243 For Oval Collar Type Chisels Henrytools models: HT-20, HT-30, HT-40 or Chicago Pneumatic 4123 Series Chippers. chipping hammer retainer pic
Swivel Hose Connector
Part Number Description View
1080 Swivel hose connector for all chipping hammers with 7/8-24 I.D. inlet thread. Use with all HT Series Chipping Hammers. swivel hose connector pic

 

 

Choice of bushing: Round-chisel freely rotates, Hex prevents chisel rotation. This hammer is a four bolt design which reduces handle breakage and offers extra strength and better grip.  This unit measures just under 16" long and weighs in at 19 lbs.  Ideal for chipping on a wall, overhead, or in confined areas.  The air chipper is available with a moil point chisel or narrow chisel.

 

Catalog View: coming soon

Parts Manual: coming soon